Xclaim Xclaim

2 computers 1 router, Online. Help pls

▼

2 computers 1 router, Online. Help pls

from Demigod Forums

Hi all.

 

Have read alot of the forums going round with port forwarding etc.

 

I have been able to play a few games online. My house mate decided to buy it so we can play online.

 

I had Ports forwarded 6100-6200 to my Ip.

and 6073 to my IP. I was able to play with and without DMZing my IP

 

What I did try was using impulseractore.exe.

To have my ip with 6112-6140 for example.

and his IP  to have the ports 6150-6180 sent there

 

But this would not work. We can connect to each other fine. But no one can connect to us.

 

Router Setup.

 

D-Link DI-634M Aus version 1.3 (latest update).

ftp://files.dlink.com.au/products/DI-634M/REV_A/Manuals//v1.00a/DI-634M_Manual_v1.0a.pdf

 

There is no specific Port Fowarding.

However there is Firewall filter.

Was wanting help.

 

Thanks heaps in advance.

6,050 views 42 replies
Reply #26 from Demigod Forums Top

xclaim, if i was you i would refer back to the second post, since it was working after that configuration, if it still doesnt work it would be save to assume that its the latest patch that is causing the problems.

Reply #27 from Demigod Forums Top

Hi Xclaim,

I've looked to you're screenshots and I only see the firewall rules. Those needs to be open but have nothing to do with portforwarding.

Firewall is just a blocker for ports to protect you from attacks

Can you post screenshots of the Virtual Server and DMZ pages of you're router?

Galactic Civilizations IV
Reply #28 from Demigod Forums Top

Quoting Xclaim, reply 25
Not enough spaces to add new rule argh this is lame
 
did 5.. ports lol
End of Xclaim's quote
Sucks. If I were you, I'd simply buy a new router. Preferably one where you can put DD-WRT or Tomato on ;). However, I don't believe you are only able to set 5 virtual servers only..?

 

Quoting StAcK3D_ActR, reply 1
xclaim, if i was you i would refer back to the second post, since it was working after that configuration, if it still doesnt work it would be save to assume that its the latest patch that is causing the problems.
End of StAcK3D_ActR's quote
Well, that solution only relies on port triggering. In theory, this would only work in some cases, since the port is only open to him, when I makes a connection on that port to someone else.

Reply #29 from Demigod Forums Top

http://img152.imageshack.us/img152/9411/42229092.jpg

 

http://img15.imageshack.us/img15/5803/virtualserverr.jpg

 

Thank you for help.

ftp://files.dlink.com.au/products/DI-634M/REV_A/Manuals//v1.00a/DI-634M_Manual_v1.0a.pdf

is the manual.

 

 

I am Defintly buying a new one.

Had trouble setting up for World in Conflict and Red alert. But managed..

Reply #30 from Demigod Forums Top

Well, that solution only relies on port triggering. In theory, this would only work in some cases, since the port is only open to him, when I makes a connection on that port to someone else.
End of quote

if i am incorrect in helping him configure his router can you please give him steps on how to configure it? instead of just saying that i am wrong.

http://img15.imageshack.us/img15/5803/virtualserverr.jpg
End of quote

with the virtual server in the private and public port entries can u specify a range of ports ( in the format 6112-6xxx)?

Reply #31 from Demigod Forums Top

@Xclaim: which Firmware version do you use for the Router? I found some other manuals from the D-Link site for the DI-634M where the Interface looks completely different and where it is also possible to define port ranges for port forwarding.

 

 

Quoting StAcK3D_ActR, reply 5

Well, that solution only relies on port triggering. In theory, this would only work in some cases, since the port is only open to him, when I makes a connection on that port to someone else.
if i am incorrect in helping him configure his router can you please give him steps on how to configure it? instead of just saying that i am wrong.
End of StAcK3D_ActR's quote
Err.. I did already... didn't you read the last posts between me and him? ;) According to
Quoting StAcK3D_ActR, reply 5
http://img15.imageshack.us/img15/5803/virtualserverr.jpg
with the virtual server in the private and public port entries can u specify a range of ports ( in the format 6112-6xxx)?
End of StAcK3D_ActR's quote
it seems like you missed them completely...

Reply #32 from Demigod Forums Top

Its an Aus version of DI-634..

So it wont load the US version of it :(

and yes i know the ones u have been looking at.

 

I have version 1.3

 

In Aus tech support, says go to virtual server.


Step 4. Click the Enable box.
- Name: Enter a name for this entry (e.g. Game)
- Private IP: Enter the IP address of the computer/device you are opening ports for(the IP address you set in Step 1).
- Private Port: Enter the port or ports you want to open.
- Public Port: Enter the port or ports you want to open (same as above).
- Next to schedule, click Always or set a schedule.

 

But i cannot do more than one port :(

Reply #33 from Demigod Forums Top

@spooky sorry.

would be nice if we could get someone from stardock in here to help.

Reply #34 from Demigod Forums Top

@Xclaim: try typing in 6112,6113,6114,etc. (all the ports, separated by a coma)

Reply #35 from Demigod Forums Top

already tried. allows 5 of any characters only.

 

Thanks so much for your help I will troubleshoot more another time.

Reply #36 from Demigod Forums Top

No problem. But I'd just get it over with and buy another router :). They aren't really expensive anyway.

Reply #37 from Demigod Forums Top

@Xclaim

I think you should use the Applications page.

Add a rule:

Enabled
Name: Demigod Computer1
Triggerport: <the port used for the lobby>-<the port used for the lobby>
TriggerType: Both
Public port: <first of ports range for computer 1>-<last of ports range for computer 1>-
Protocoltype: UDP

The 2nd computer should use a different triggerport and portrange

Make sure the firewall is not blocking the 'lobby' ports and port ranges.



You can uze DMZ if you want to connect with 1 computer only

Hope this helps

 

 

 

 

Reply #39 from Demigod Forums Top

Good to hear, please post your results if you get this working for both computers, so others can use it :-)

Reply #40 from Demigod Forums Top

it works for my d-link router when i do public : 6000-62000 + privat 6000-6200

after that my ports where open but game still didnt work, after DMZing my ip it workt fine since than. (before patches)

buyed the game about 4/29/09 and it workt since than.

but cant say if its works for 2 computers, coulndt bring it to run with my pal buyed the game after seen some online playing @ my computer.

edit: arrr sry didnt read 2.last post :(

Reply #42 from Demigod Forums Top

UPDATE:

Since this new patch, i can now not connect. Sometimes the 'waiting for connection information' just sits there doing nothing, others are having this problem too.