2 computers 1 router, Online. Help pls

Images

http://img136.imageshack.us/img136/7441/router2.jpg

http://img136.imageshack.us/img136/8633/router1.jpg

this is how you should set it up, or what i have done for only 1 computer (i have a similar router dlink DI-524)

In your FIREWALL tab use this configuration(it basically lets everything from the outside through ports 6000-6200)

source: WAN 

IP range start: *

IP range end: *

destination: LAN

IP range start: 192.168.0.1

IP range end: 192.168.0.255

Protocol: UDP

port range: 6000-6200 <-- 6000 is a NAT facilitator port, you may need to open it so it can connect better

remember this is the firewall of the router, it is not allowing applications through(or so i think). u should then go into the APPLICATIONS TAB and do this configuration:

Name: whatevayawannacallit(demigod)

trigger port: 6112-6180

Trigger type: BOTH

public ports: 6112-6180 <-- type that exactly

public type: BOTH

then apply changes and reset router, and go to impulsereactor.exe and specify the ports you want to use for each computer

hopefully this helps.

I have 2 pc's and a DIR-655 router, I've had a ton of trouble trying to connect to others for 3v3 or more, but the beta patch has helped somewhat.  Before the beta patch playing 3v3 with these 2 computers was next to impossible.  2v2 was not easy but it was doable.

Did you use ImpulseReactorOptions.exe on the 2 systems to ensure the ranges on them?

Thanks heaps stacked.

Have set it up.

going to try now.

1 point

IP range end: 192.168.0.255    Only goes to 254...

bah, forgot my basic networking 255 is a broadcast

let me know if it works, since i may get my bro playing this game soon aswell!

UPDATE:

atm seems to connect ALOT faster to ppl.

However there is some it wont connect to, i think its on their end tho.

If it fixes for me. ill post screen shots of it for ppl

another update.

seems i can connect easily, BUT other take long to connect to ME

NAT Keeps failing

Pic of what u told me to do

http://img257.imageshack.us/img257/640/70511166.jpg

xclaim these are my issues currently, check them out and reply there if you get the same problems

http://forums.demigodthegame.com/351220

hey.

Can play pantheon my mate and I AFTER waiting ages for a game lol

nice so you both played in the same game?

Panetheon works after ages and normally 2v2.

So I am thinking we have our connection ok, its just others that dont have it setup in custom games.

Hi guys.

I cant play again..

Ive checked the portchecker from portforward.com and my ports arent open!

YET if you look at my screen shot

http://img257.imageshack.us/img257/640/70511166.jpg

Its clearly open!

the portchecker application didnt work for me either, there was another website that was posted on a forum(cant remember what it was) which showed my ports being in "stealthed" mode which im quite certain means that others cannot find out if your ports are open or not

yeha man.

well wen i launch demigod... well atm im searching for games no luck.

But portforward checker says i have all open?.,.. argh lol

yea for some reason in that custom game before i couldnt connect to u at all, but all others in the lobby i could

did u fiddle with any settings?

i did play around but i put them back..

ah.. well!!!

Portforward checker said its fine.

I have DMZed my IP and still no dice..

I will try.

but under Virtual server it has

and then Private port XXXX

Public port XXXX

it DOESNT have Ports XXXX-XXXX

wtf do i put for prive and public? consider i have 2 comps wanting to play online

http://img257.imageshack.us/img257/7484/test01mot.jpg

is what it looks like.

u cant put port 6112-6180 for example into public or prive port

and i have static IP for portforwarding

Try 6112:6180 instead. You put the same values in private and public.

If you are unable to define a port range at all, then you simply have to forward each port individually.

you need to do this(or so i think):

put in your computers IP address.

protocol type: UDP

private port: 6112-6140 (or ports you want to assign to it, make sure its the same as the impulsereactor.exe file)

public port: 6112-6140 (or ports you want to assign to it, make sure its the same as the impulsereactor.exe file)

then:

make a new virtual server

put in the OTHER computers IP address

protocol type: UDP

private port: 6150-6180 (or ports you want to assign to it, make sure its the same as the impulsereactor.exe file)

public port: 6150-6180 (or ports you want to assign to it, make sure its the same as the impulsereactor.exe file)

hopefully that works for u

but then again, i havent needed to do this, i just opened the ports through the APPLICATIONS tab!

thanks for your help, it is very much appreciated.  doing 6112:6180 doesnt work. so i have to do 40 ports for my computer as i have been using impulsreactoroptions to do 6112-6140..

I cant do 6112-680 wont let me type it. fail router

Also reset the Firewall rules to default. You shouldn't mess around there, unless you know what you are doing.

Not enough spaces to add new rule argh this is lame

did 5.. ports lol