Add-0n components

from GalCiv2 Forums
Is there a way to flip or rotate an add-on component. Sometimes when they sit themselves they are not the mirror image of the opposite side. Example, I tried to place two hyperdrive engines near the rear of one of my ships. Two hot points same distance away from one another. I placed one engine and it faced outword. I placed the second engine and it was outwards too ( The same direction as the other ). In a case like this you dont want >>>> >>>> You want <<<< >>>> and I cant seem to achieve this.
5,844 views 5 replies
Reply #1 from Stardock Forums Top
There is a small part in the parts box that will rotate the hardpoint. There is a reverse, a +90 deg and a -90deg that I have seen so far.

Cheers!
Reply #2 from Stardock Forums Top
Tinplated is right, Look in the extra's department around 60% down.
Elemental: Reforged
Reply #3 from Stardock Forums Top
Non-symetrical part will not mirror on a ship. However warp drives are all as far as I know symetrical and therefore should appear the same on either side of the ship. You may be seeing the result of a defective hardpoint.

Link

That's the list I have compiled of all bad hardpoints I could find. They apparently will be making changes this weekend to fix them.
Reply #4 from Stardock Forums Top
Also as far as I can tell the +90 only works once. AKA- if you hit it once it goes +90 degrees, but if you do it agian, it goes back to the orriginal. With the -90 if you do it twice it'll do total -180.
Reply #5 from Stardock Forums Top
We have more rotaters and such, but we did not want to make the default list of "extras" two long. Soon we will have a library of extra stuctures that you can download. form this site. I will make sure that the other rotaters are thare as soon as it is up.