Frogboy Frogboy

STICKY: Problems getting the game started? Post here!

▼

STICKY: Problems getting the game started? Post here!

We're here to help!

from GalCiv2 Forums

IF you've installed the game and cannot get it to even get into a game, then this is the place.

IF you're able to play the game and run into a problem later, find the other thread to post reports. This thread is only for people who have installed the game and simply can't get it to work for some reason.

If you run into same basic problem such as:

a) Game doesn't load

b) Game causes your computer to catch fire

c) Game formats the hard drives of your neighbor's computer even though it's not connected to the net.

d) Some other basic problem that is keeping the game from running for you.

Then post here.

WE NEED:

1) Your debug.err info (which is located in your GalCiv II directory)

2) Any other info you think is pertinent (such as what you were doing)

ALSO:

MOST COMMON REASONS:

a) You're running your desktop in 16-bit color

or

b) You have ancient video drivers.

Make sure you've updated to the latest version of the game! Click on the downloads links above.

30,541 views 63 replies
Reply #51 from GalCiv2 Forums Top
A few of you haven't had replies so here's some general troubleshooting tips:

-Post your entire debug.err file which can be opened with notepad from your GalCiv2 folder.
-***Like the original post states, update your video drivers.***
-If you have an ATI or nVIDIA card you can try 3rd party drivers from this Link.
-Update your audio drivers.
-If you have a dual core processor check this Link.
-Make sure your game is running the same resolution as your desktop.
-Try turning off anti-aliasing.
-Try running in window mode.
-Run the latest patch 1.0X (the 1.1 beta is not supported).
-Run Windows in English.
-Make sure you have enough virtual memory allocated.

If all else fails, try posting a thread of your own so it doesn't get lost. Quite a few people are willing to help you out that way. Also, you can email Stardock or go to their IRC channel: irc.stardock.com Hope this post helps some of you.
Reply #52 from GalCiv2 Forums Top
Full screen mode = black screen.

Runs FIne in windows mode.. although extreamly slow!

Any black screen fixes out there? I have updated drivers good card great memory.

Debug Message: Version v1.1 BETA-2A last updated on: Thu Mar 30 21:37:53 2006
Debug Message: Could not find a TGN Serial No.
Debug Message: *********DXDiag info follows.*********
System Info
Time: 3/31/2006, 00:09:23
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Machine Name: YOUR-6JNHHU0520
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Languages: English (Regional Setting: English)
System Manufacturer: HP Pavilion 06
System Model: DB282A-ABA 304w
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) XP 1800+, MMX, 3DNow, ~1.5GHz
Physical Memory: 992MB RAM
Page File: 224MB used, 2164MB available
Windows Dir: C:\WINDOWS


Display Info
Display device 1:
Device Name: \\.\DISPLAY1
Card Name: NVIDIA GeForce FX 5500
Manufacturer: NVIDIA
Chip Type: GeForce FX 5500
DAC Type: Integrated RAMDAC
Key Device: Enum\PCI\VEN_10DE&DEV_0326&SUBSYS_00000000&REV_A1
Display Memory: 256.0 MB
Current Display Mode: 1024 x 768 (32 bit) (60Hz)
Monitor Name: hp pavilion mx70
Monitor Max Resolution: 1280,1024
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.8421
Driver Date: 3/9/2006 15:29:00
DirectX Acceleration Enabled: Yes

Display device 2:
Device Name: \\.\DISPLAY2
Card Name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics, Inc.
Chip Type: S3 ProSavage DDR
DAC Type: S3 SDAC
Key Device: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_90121509&REV_00
Display Memory: 32.0 MB
Current Display Mode: 1024 x 768 (32 bit) (60Hz)
Monitor Name: Default Monitor
Monitor Max Resolution:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0012
Driver Date: 5/26/2003 13:57:42
DirectX Acceleration Enabled: Yes



Sound info
Sound device 1:
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_90121509&REV_50
Manufacturer ID: 1
Product ID: 100
Driver Name: vinyl97.sys
Provider: VIA Technologies, Inc.
Driver Version: 6.14.0001.4100
Driver Date: 4/8/2005 11:48:18
Type: WDM
Other Drivers:
Acceleration Level: 3
Cap Flags: 0
Min/Max Sample Rate: 0, 0



Debug Message: *********END dxdiag info.*********
Debug Message: Entering WinMain
Debug Message: ******* Starting Game Shell *******
Debug Message: Preparing to change display settings.
Debug Message: Using multilsample setting: D3DMULTISAMPLE_NONE
Debug Message: Game Resolution: 1024 x 768
Debug Message: Running in windowed mode.
Debug Message: HAL (sw vp): S3 Graphics ProSavageDDR
Debug Message: D3DPRESENT_INTERVAL_IMMEDIATE
Debug Message: Refresh rate: 0
Debug Message: Bit Depth: 32 bit.
Debug Message: *********Checking D3DDevice Caps***********************
Debug Message: Hardware does not support a color cursor.
Debug Message: Border size reported as 6 by 32
Debug Message: RGB in format 6:6:6, Masks reported as ff0000:ff00:ff
Debug Message: Now windowed.
Debug Message: Shell initialization complete
Debug Message: ***** Initializing Game *****
Debug Message: Timer Frequency is 0 5b518870
Debug Message: Initializing sound card.
Debug Message: initailizing bink
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Gfx\*.png
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Gfx\Race\*.png
Debug Message: Create setup screens.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Set mouse.
Debug Message: Set update timer.
Debug Message: Clear data definitions.
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\Techs\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\ShipComponents\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\ships\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\ShipDefs\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\*.StarSystems
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\*.raceconfig
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\PlanetImprovements\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\TerrainColorSchemes\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\PlanetDescriptions\*.xml
*DEBUG ERROR: ***Unable to find required tech ImpossibleTech for PirateShip. ***
*DEBUG ERROR: ***Unable to find required tech ImpossibleTech for Starbase. ***
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\ships\*.shipclass
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\ships\*.shipcfg
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\Anomalies\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\Events\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\UPIssues\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\Invasion\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\PoliticalParties\*.xml
Debug Message: No files found matching mask C:\Documents and Settings\Owner\My Documents\My Games\GalCiv2\Mods\Data\StarbaseModules\*.xml
Debug Message: Reading Star Names
Debug Message: Reading Star Names... Done
Debug Message: CustomRaceWnd: Cannot find OBJID CustomRace_Description_Text
Debug Message: CustomRaceWnd: Cannot find OBJID CustomRace_Tab_Homeworld
Debug Message: Creating Galaxy
Debug Message: Set galaxy size.
Debug Message: Killing threads.
Debug Message: Kiling civs.
Debug Message: Killing ships.
Debug Message: Killing rallypoints.
Debug Message: Killing misc objects.
Debug Message: Killing stars.
Debug Message: Killing anomalies.
Debug Message: Killing space resources.
Debug Message: Killing colonies and planets.
Debug Message: killing scenario.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Creating Random Map
Debug Message: Creating Random Map... Stars
Debug Message: Number of Unplaced Stars: 8.
Debug Message: Creating Random Map... Planets
Debug Message: Creating Random Map... Anomalies
Debug Message: Num Anomalies: 42
Debug Message: Creating Random Map... Resources
Debug Message: Creating Random Map... Done
Debug Message: TitleWnd: Quit Button.
Debug Message: Posting WM_CLOSE message.
Debug Message: WM_CLOSE message received.
Debug Message: GameUninitialize start
Debug Message: Killing hidden planet surface init thread. Waiting for it to die.

Debug Message: Aborting hidden planet surface initialization.
Debug Message: Hidden planet surface init thread dead.
Debug Message: Killing Galaxy
Debug Message: Killing threads.
Debug Message: Kiling civs.
Debug Message: Killing ships.
Debug Message: Killing rallypoints.
Debug Message: Killing misc objects.
Debug Message: Killing stars.
Debug Message: Killing anomalies.
Debug Message: Killing space resources.
Debug Message: Killing colonies and planets.
Debug Message: killing scenario.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Clear data definitions.
Debug Message: Killing Galaxy: Completed
Debug Message: GameUninitialize end
Debug Message: Device not cleared. 1 counts left.
Debug Message: D3D not cleared. 1 counts left.
Debug Message: Destroying Window.
Debug Message: Main Shell terminating normally
Curtains - Customize Windows with additional styles
Reply #53 from Stardock Forums Top
I updated on Version v1.1 BETA-2A but both problems still exist.

When I start GC2 this is what I see for minutes in the Taks Manager:
Image Name CPU Mem Usage
GalCiv2.exe 00 7.268K

i.e. no change in CPU usage, it stays at 0% and memory usage slowly increases from 7.268k to 7.620K in minutes.
Reply #54 from GalCiv2 Forums Top
-Run the latest patch 1.0X (the 1.1 beta is not supported).

I have the 1.1 beta but with 1.0X there were exactly the same problems. I simply hoped that it would get fixed with the beta.

If all else fails, try posting a thread of your own so it doesn't get lost.

Should I start a new post and double post all the text from above?
Reply #55 from GalCiv2 Forums Top
I'm not sure what Stardock prefers. I would avoid reposting the same debug.err info though. My meaning was that it is easier for people to help you troubleshoot your problem if you have your own thread than if you are just one debug.err file listed with dozens of others. I'm not sure how the quickstart function works, as I just launch the game normally. Also, you can run the game just fine in fullscreen mode, not using a quickstart .exe? My advice to you (and anyone having problems) is to not run a beta version of the game if you are having problems. Stick to an official release.
Reply #56 from GalCiv2 Forums Top
DEagent, looks like the game isn't using your nVIDIA card, try disabling the ProSavage card.
Reply #57 from GalCiv2 Forums Top
originally posted this in the wrong place. can't play the game at all. if i try to start a new game, as soon as i click next, which should take me to the race selection screen, game ctd's. if i play campaign mode, as soon as i click play, ctd's. here's the debug.


I have the exact same problem...
Reply #58 from GalCiv2 Forums Top
@ HEEGZ
Both problems did already exist in the official 1.0X version. They are not related to the beta.

The QICKSTAT option is described in the command line option area of the wiki. It starts directly a game with the last options. It's similar to a program start and Ctrl+N. I can live without it but it guess Stardock is interested in this kind of bugs.

The other problem with the very long start time is more of a headache.

I've planned to deinstall the complete game when the official version of 1.1 is out and reinstatt all from scratch.

But I would be happy when anyone has another idea I can try to fix it.
Reply #59 from GalCiv2 Forums Top
Hi there.

I'm experiencing problems starting a game. The game menu comes up and I am able to choose what settings I want but when I then try and start a game it then crashes.

I have a Limited Edition version bought in the U.K. and I also have two serial no's, having seen your link on European purchases and am confused as th which one I should enter.

Please find below my debug.err message.

Debug Message: Version v1.0 last updated on: Sat Feb 4 16:26:34 2006
Debug Message: Could not find a TGN Serial No.
Debug Message: *********DXDiag info follows.*********
System Info
Time: 3/31/2006, 21:08:17
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Machine Name: ELLISCOMP
Operating System: Windows 2000 Professional (5.0, Build 2195) Service Pack 4
Languages: English (Regional Setting: English)
System Manufacturer: NVIDIA
System Model: AWRDACPI
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) XP 1900+, ~1.5GHz
Physical Memory: 512MB RAM
Page File: 160MB used, 1085MB available
Windows Dir: F:\WINNT


Display Info
Display device 1:
Device Name: \\.\DISPLAY1
Card Name: RADEON 9200 SERIES (Omega 2.4.96b)
Manufacturer: ATI Technologies Inc. (Omega 2.4.96b)
Chip Type: RADEON 9200 AGP (0x5961)
DAC Type: Internal DAC(400MHz)
Key Device: Enum\PCI\VEN_1002&DEV_5961&SUBSYS_7C11174B&REV_01
Display Memory: 256.0 MB
Current Display Mode: 1024 x 768 (32 bit) (100Hz)
Monitor Name: Hansol 720D
Monitor Max Resolution: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6396
Driver Date: 9/23/2003 04:42:04
DirectX Acceleration Enabled: Yes



Sound info
Sound device 1:
Description: Modem #0 Line Playback (emulated)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID:
Manufacturer ID: 1
Product ID: 81
Driver Name:
Provider:
Driver Version:
Driver Date:
Type: Emulated
Other Drivers:
Acceleration Level: 2
Cap Flags: 0
Min/Max Sample Rate: 0, 0

Sound device 1:
Description: Modem #0 Handset Playback (emulated)
Default Sound Playback: No
Default Voice Playback: No
Hardware ID:
Manufacturer ID: 1
Product ID: 81
Driver Name:
Provider:
Driver Version:
Driver Date:
Type: Emulated
Other Drivers:
Acceleration Level: 2
Cap Flags: 0
Min/Max Sample Rate: 0, 0



Debug Message: *********END dxdiag info.*********
Debug Message: Entering WinMain
Debug Message: ******* Starting Game Shell *******
Debug Message: Going Fullscreen
Debug Message: Preparing to change display settings.
Debug Message: Using multilsample setting: D3DMULTISAMPLE_NONMASKABLE
Debug Message: Game Resolution: 1280 x 1024
Debug Message: Running fullscreen.
Debug Message: HAL (hw vp): RADEON 9200 SERIES (Omega 2.4.96b)
Debug Message: D3DPRESENT_INTERVAL_DEFAULT
Debug Message: Refresh rate: 100
Debug Message: Bit Depth: 32 bit.
Debug Message: *********Checking D3DDevice Caps***********************
Debug Message: A full-color cursor is supported in hardware at high resolution modes.
Debug Message: RGB in format 6:6:6, Masks reported as ff0000:ff00:ff
Debug Message: Now Fullscreen
Debug Message: Shell initialization complete
Debug Message: ***** Initializing Game *****
Debug Message: Timer Frequency is 0 369e99
Debug Message: Initializing sound card.
Debug Message: Failed to startup Miles Sound System.
Debug Message: initailizing bink
Debug Message: Failed to open digitial sound driver for Bink.
Debug Message: waveOutOpen() failed.
Debug Message: Error initializing BinkSound.
Debug Message:
Debug Message: Create setup screens.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Set mouse.
Debug Message: Set update timer.
Debug Message: Clear data definitions.
Debug Message: No files found matching mask H:\\My Games\GalCiv2\*.StarSystems
*DEBUG ERROR: ***Unable to find required tech ImpossibleTech for PirateShip. ***
*DEBUG ERROR: ***Unable to find required tech ImpossibleTech for Starbase. ***
Debug Message: No files found matching mask H:\\My Games\GalCiv2\ships\*.shipclass
Debug Message: No files found matching mask H:\\My Games\GalCiv2\ships\*.shipcfg
Debug Message: Reading Star Names
Debug Message: Reading Star Names... Done
Debug Message: Digital support not enabled.
Debug Message: Digital support not enabled.
Debug Message: Digital support not enabled.
Debug Message: CustomRaceWnd: Cannot find OBJID CustomRace_Description_Text
Debug Message: CustomRaceWnd: Cannot find OBJID CustomRace_Tab_Homeworld
Debug Message: Creating Galaxy
Debug Message: Set galaxy size.
Debug Message: Killing threads.
Debug Message: Kiling civs.
Debug Message: Killing ships.
Debug Message: Killing rallypoints.
Debug Message: Killing misc objects.
Debug Message: Killing stars.
Debug Message: Killing anomalies.
Debug Message: Killing space resources.
Debug Message: Killing colonies and planets.
Debug Message: killing scenario.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Creating Random Map
Debug Message: Creating Random Map... Stars
Debug Message: Number of Unplaced Stars: 22.
Debug Message: Creating Random Map... Planets
Debug Message: *************** Failed To Place Planet ***************
Debug Message: *************** Failed To Place Planet ***************
Debug Message: Digital support not enabled.
Debug Message: *************** Failed To Place Planet ***************
Debug Message: Creating Random Map... Anomalies
Debug Message: Num Anomalies: 118
Debug Message: Creating Random Map... Resources
Debug Message: Creating Random Map... Done
Debug Message: Digital support not enabled.
Debug Message: Digital support not enabled.
Debug Message: Digital support not enabled.
Debug Message: Creating Civs
Debug Message: Drengin Empire: Intellence -> 30
Debug Message: Altarian Republic: Intellence -> 30
Debug Message: Creating Civs... Done
Debug Message: Updating ZOC.
Debug Message: Updating ZOC.
Debug Message: Galaxy Create... Done
Debug Message: UIBeginGame called with g_ulLocalPlayerID = 0
Debug Message: setting size 16 x 0
Debug Message: setting size 16 x 0
Debug Message: setting size 16 x 0

Many thanks

Ellis 82
Reply #60 from Stardock Forums Top
@ Ellis82

Driver Date: 9/23/2003 04:42:04

Update your video drivers. GC2 uses a new feature of Direct X which is not supported by old drivers. This is mentioned in the readme, this forum and on many other places as well. And I bet you got a message "please update your video drivers" when you first started your game as well
Reply #62 from GalCiv2 Forums Top
Okay, I have these CtDs all the time and no Sound at all when watching the Intro. Anytime I click the Mouse or do anything else I end up in CtD. Fortunately you have invented the Debug-Report, so I am posting it here. Maybe any ideas how to solve the problem?

Yours,

Valamezar.


Debug Message: Version v1.0X.2 last updated on: Tue Mar 7 15:02:59 2006
Debug Message: Could not find a TGN Serial No.
Debug Message: *********DXDiag info follows.*********
System Info
Time: 4/3/2006, 13:46:50
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Machine Name: AZRAEL
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Languages: German (Regional Setting: German)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, MMX, 3DNow (2 CPUs), ~2.3GHz
Physical Memory: 2048MB RAM
Page File: 173MB used, 3766MB available
Windows Dir: C:\WINDOWS


Display Info
Display device 1:
Device Name: \\.\DISPLAY1
Card Name: NVIDIA GeForce 7800 GT
Manufacturer: NVIDIA
Chip Type: GeForce 7800 GT
DAC Type: Integrated RAMDAC
Key Device: Enum\PCI\VEN_10DE&DEV_0092&SUBSYS_030110DE&REV_A1
Display Memory: 256.0 MB
Current Display Mode: 1280 x 1024 (32 bit) (75Hz)
Monitor Name: Plug und Play-Monitor
Monitor Max Resolution: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.8421
Driver Date: 3/9/2006 16:29:00
DirectX Acceleration Enabled: Yes



Sound info
Sound device 1:
Description: Realtek AC97 Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_10DE&DEV_0059&SUBSYS_812A1043&REV_A2
Manufacturer ID: 1
Product ID: 100
Driver Name: ALCXWDM.SYS
Provider: Realtek Semiconductor Corp.
Driver Version: 5.10.0000.5750
Driver Date: 11/17/2004 13:05:38
Type: WDM
Other Drivers:
Acceleration Level: 3
Cap Flags: 0
Min/Max Sample Rate: 0, 0



Debug Message: *********END dxdiag info.*********
Debug Message: Entering WinMain
Debug Message: ******* Starting Game Shell *******
Debug Message: Going Fullscreen
Debug Message: Preparing to change display settings.
Debug Message: Using multilsample setting: D3DMULTISAMPLE_4_SAMPLES
Debug Message: Game Resolution: 1024 x 768
Debug Message: Running fullscreen.
Debug Message: HAL (hw vp): NVIDIA GeForce 7800 GT
Debug Message: D3DPRESENT_INTERVAL_DEFAULT
Debug Message: Refresh rate: 75
Debug Message: Bit Depth: 32 bit.
Debug Message: *********Checking D3DDevice Caps***********************
Debug Message: A full-color cursor is supported in hardware at high resolution modes.
Debug Message: RGB in format 6:6:6, Masks reported as ff0000:ff00:ff
Debug Message: Now Fullscreen
Debug Message: Shell initialization complete
Debug Message: ***** Initializing Game *****
Debug Message: Timer Frequency is 0 369e99
Debug Message: Initializing sound card.
Debug Message: initailizing bink
Debug Message: Create setup screens.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Set mouse.
Debug Message: Set update timer.
Debug Message: Clear data definitions.
Debug Message: No files found matching mask C:\Dokumente und Einstellungen\Valamezar\Eigene Dateien\My Games\GalCiv2\*.StarSystems
Debug Message: No files found matching mask C:\Dokumente und Einstellungen\Valamezar\Eigene Dateien\My Games\GalCiv2\*.raceconfig
Reply #63 from GalCiv2 Forums Top
I cant get the game to load after I have set the parameters.

i should note, I have an ati radeon 9600xt, and running it on 1600x1200 on 32 bit color.
here is my dubug file:
Debug Message: Version v1.0X.2 last updated on: Tue Mar 7 15:02:59 2006
Debug Message: Could not find a TGN Serial No.
Debug Message: *********DXDiag info follows.*********
System Info
Time: 4/3/2006, 12:33:44
DirectX Version: DirectX 9.0c (4.09.0000.0904)
Machine Name: EBCONCOMP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Languages: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 12/13/05 11:07:57 Ver: 08.00.09
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Physical Memory: 2048MB RAM
Page File: 296MB used, 3646MB available
Windows Dir: F:\WINDOWS


Display Info
Display device 1:
Device Name: \\.\DISPLAY1
Card Name: Celestica Gold Edition RADEON 9600XT
Manufacturer: ATI Technologies Inc.
Chip Type: ATI RADEON 9600 Series AGP (0x4152)
DAC Type: Internal DAC(400MHz)
Key Device: Enum\PCI\VEN_1002&DEV_4152&SUBSYS_002018D4&REV_00
Display Memory: 256.0 MB
Current Display Mode: 1600 x 1200 (32 bit) (60Hz)
Monitor Name: Default Monitor
Monitor Max Resolution:
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6599
Driver Date: 1/24/2006 20:52:48
DirectX Acceleration Enabled: Yes



Sound info
Sound device 1:
Description: SoundMAX Digital Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_80F31043&REV_02
Manufacturer ID: 1
Product ID: 100
Driver Name: smwdm.sys
Provider: Analog Devices
Driver Version: 5.12.0001.3630
Driver Date: 6/2/2003 14:42:14
Type: WDM
Other Drivers:
Acceleration Level: 3
Cap Flags: 0
Min/Max Sample Rate: 0, 0



Debug Message: *********END dxdiag info.*********
Debug Message: Entering WinMain
Debug Message: ******* Starting Game Shell *******
Debug Message: Going Fullscreen
Debug Message: Preparing to change display settings.
Debug Message: Using multilsample setting: D3DMULTISAMPLE_4_SAMPLES
Debug Message: Game Resolution: 1024 x 768
Debug Message: Running fullscreen.
Debug Message: HAL (hw vp): Celestica Gold Edition RADEON 9600XT
Debug Message: D3DPRESENT_INTERVAL_DEFAULT
Debug Message: Refresh rate: 60
Debug Message: Bit Depth: 32 bit.
Debug Message: *********Checking D3DDevice Caps***********************
Debug Message: A full-color cursor is supported in hardware at high resolution modes.
Debug Message: RGB in format 6:6:6, Masks reported as ff0000:ff00:ff
Debug Message: Now Fullscreen
Debug Message: Shell initialization complete
Debug Message: ***** Initializing Game *****
Debug Message: Timer Frequency is 0 b2bb9d80
Debug Message: Initializing sound card.
Debug Message: initailizing bink
Debug Message: Create setup screens.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Set mouse.
Debug Message: Set update timer.
Debug Message: Clear data definitions.
Debug Message: No files found matching mask F:\Documents and Settings\gdx\My Documents\My Games\GalCiv2\*.StarSystems
*DEBUG ERROR: ***Unable to find required tech ImpossibleTech for PirateShip. ***
*DEBUG ERROR: ***Unable to find required tech ImpossibleTech for Starbase. ***
Debug Message: No files found matching mask F:\Documents and Settings\gdx\My Documents\My Games\GalCiv2\ships\*.shipclass
Debug Message: No files found matching mask F:\Documents and Settings\gdx\My Documents\My Games\GalCiv2\ships\*.shipcfg
Debug Message: Reading Star Names
Debug Message: Reading Star Names... Done
Debug Message: CustomRaceWnd: Cannot find OBJID CustomRace_Description_Text
Debug Message: CustomRaceWnd: Cannot find OBJID CustomRace_Tab_Homeworld
Debug Message: Creating Galaxy
Debug Message: Set galaxy size.
Debug Message: Killing threads.
Debug Message: Kiling civs.
Debug Message: Killing ships.
Debug Message: Killing rallypoints.
Debug Message: Killing misc objects.
Debug Message: Killing stars.
Debug Message: Killing anomalies.
Debug Message: Killing space resources.
Debug Message: Killing colonies and planets.
Debug Message: killing scenario.
Debug Message: Clear galaxy settings.
Debug Message: Clear influence.
Debug Message: Clear up laws.
Debug Message: Clear first time events.
Debug Message: Clear wonders and trade goods.
Debug Message: Clear sector mapper.
Debug Message: Creating Random Map
Debug Message: Creating Random Map... Stars
Debug Message: Number of Unplaced Stars: 166.
Debug Message: Creating Random Map... Planets
Debug Message: *************** Failed To Place Planet ***************
Debug Message: *************** Failed To Place Planet ***************
Debug Message: *************** Failed To Place Planet ***************
Debug Message: *************** Failed To Place Planet ***************
Debug Message: Creating Random Map... Anomalies
Debug Message: Num Anomalies: 300
Debug Message: Creating Random Map... Resources
Debug Message: Creating Random Map... Done
Debug Message: Creating Civs
Debug Message: Drengin Empire: Intellence -> 30
Debug Message: Altarian Republic: Intellence -> 30
Debug Message: Arcean Empire: Intellence -> 30
Debug Message: Torian Confederation: Intellence -> 30
Debug Message: Yor Collective: Intellence -> 30
Debug Message: Creating Civs... Done
Debug Message: Updating ZOC.
Debug Message: Updating ZOC.
Debug Message: Galaxy Create... Done
Debug Message: UIBeginGame called with g_ulLocalPlayerID = 10
Debug Message: setting size 16 x 0
Debug Message: setting size 16 x 0
Debug Message: setting size 16 x 0


Why is it failing to load??